A classful network is a network addressing architecture used in the networks since 1981.The RFC 790 and 791 released in 1981 describing how IPv4 network addresses were primarily allocated based on a classification system. The authors of IPv4 addresses set up three classes of network addresses, class A, B, and C for different network sizes. The classful network addresses define with a specific format for the high order bits (HOB). High order bits (HOB) are the most significant bit in a 32-bit address. The Classful addresses remain in use until to the introduction of Classless Inter-Domain Routing in 1993. The method divides the IP address space for Internet Protocol version 4 (IPv4) into five address classes based on the leading four address bits.
Class A addresses
The high order bit for Class A addresses is 0. Large organizations use this class. The address range starts from 0.0.0.0 to 127.255.255.255. The 0.0.0.0 address is reserved for default routing and the 127.0.0.0 address is reserved for loopback testing.
Class B addresses
The high Order Bits for Class B address are 10. Medium-to-large organizations use this class. The range of Class B addresses is 22.214.171.124 to 126.96.36.199.
Class C addresses
The High Order Bit for Class B addresses is 110. The small-to-medium organizations use this class. The address range starts from 192.0.0.0 to 188.8.131.52.
Class D Addresses
The High Order Bits for Class D addresses are 1110. This class is using for multicasting. Multicasting is a technique to find a group of hosts that are part of a multicast group. The Range starts from 184.108.40.206 to 220.127.116.11.
Class E Addresses
The High Order Bits for Class E addresses are 1111. Class E address also Reserved for experimental and future use. The range starts from 240.0.0.0 to 255.255.255.255. The address 255.255.255.255 is reserved for switch broadcasting.
High Order Bit (HOB)
The most significant bit (MSB), also known as the high–order bit, the bit position in a binary number having the greatest value. It is the left-most bit due to the convention in the positional notation of writing more significant digits further to the left. The table below illustrates the High Order bit.
Classful Subnet Masks
The RFC 790 also define the default subnet mask for each network class.
Class A Address Subnet Mask
The classful network of class A used the first octet to identify the network portion of the address. The default subnet mask of Class A is 255.0.0.0. The first bit of Class A address from 0.0.0.0 to 127.0.0.0 is always 0 and only 7 bits were left in the first octet. So, this made 2 to the 7th power or 128 networks. But two network 0.0.0.0 and 127.0.0.0 reserved for default route and loopback testing. So, the actual number of the network for Class A is 126 (1-126) networks. The remaining 24 bits use the host in the in the host portion so, each class A address had the potential for over 16 million individual host addresses. The host portion must be 0 and the network portion must be 1s in the subnet mask. The figure below illustrates the Class A address default subnet mask.
Class B Address Subnet Mask
The Classful Class B networks used the first two octets to identify the network portion of the network address. The first two bits of the first octet, 10 define the class of network so; 14 bits in the first two octets define the number of networks, the number of the network in class B network is 2 the power of 14th, meaning 16,384 class B network addresses. The 3rd and 4th octet is for the host, so each class B network address contained 16 bits in the host portion, meaning the number of host per subnetwork of Class B is 2 the power of 16th, the resulting host per network is 65536. The figure below illustrates the subnet mask of Class B Address.
Class C Address Subnet Mask
The classful class C networks used the first three octets to identify the network portion of the network address. The first three bits 110 recognized the class of the network and the remaining 21 bits for assigning networks for over 2 million class C networks. So, each class C network only 8 bits remain in the host portion. The 8 bits meaning 254 possible host addresses in each Class C network. The figure below illustrates the Class C network subnet mask.
Classful Routing Protocol
The specific default subnet masks to each class made routing update messages smaller. Because Classful routing protocol does not include the subnet mask information in their updates. So, the receiving router applies the default mask based on the value of the first octet or more accurately, the first three bits of the address, which identifies the class. Routing protocols, for example, RIPv1 only need to transmit the network address of known routes. It does not need the subnet mask in the routing update. Because the receiving router examines only the value of the first octet in the network address and determines the subnet mask, or by applying its ingress interface mask for subnetted routes.
Classful Addressing Waste
The classful addresses have a huge waste of address space. At the beginning of the Internet, organizations were assigned an entire classful network address from the A, B, or C class resulting in IP address waste. So, the allocation of IP addresses in classful network addressing is very inefficient.
Class A address had 50% of the total IP addresses. However, but it has only 126 networks, so it can assign to only 126 organizations. The class A network uses 24 bits in the host portion so, we can calculate the IP address of each network which is 224-2 = 16777214 addresses. The classless addresses reduce this waste of huge IP address, but some companies and governmental organizations still have class A addresses. For example, General Electric has 18.104.22.168/8, Apple owns 22.214.171.124/8, and the U.S. Postal Service owns 126.96.36.199/8 network.
Class B had 25% of the total address space. It has 16,384 networks so, 16384 organizations can get and use class B network address. A network uses 24 bits in the host portion so, we can calculate the IP address of each network which is 216-2 = 65534 host addresses.
Class C had 12.5 % of the total address space. A network uses 8 bits in the host portion so, we can calculate the IP address of each network which is 28-2 = 54 host addresses. A much small organization can get and use class C networks, but the total number of hosts are limited in the class C networks. in many cases.
Classes D and E are used for multicasting and reserved addresses. It had 12.5 % of address space.
The figure below illustrates the classful address space. Overall the chart for all classes including Class D and Class E. The chart displays the total network, host per network and maximum hosts in Class A, B, and C.