Lab-Assigning IPv6 Address and Configure Static IPv6 Routing

Lab-Assigning IPv6 Address and Configure Static IPv6 Routing

Download 5
Total Views 36
File Size 4.00 KB
File Type
Create Date August 26, 2017
Last Updated October 14, 2018


  • Set Up topology or download Topology and Configure Basic setting for Router 
  • Configure IPv6 Addresses for Router and also for a Computers
  • Verify IPv6 Configuration and End-to-End Connectivity by Ping command and also transferring a data

 Background of the Lab

This is the practice lab for the students to configure hosts and device interfaces with IPv6 addresses and look at how the all-router multicast group is assigned to a router. You will use show commands to view IPv6 unicast and multicast addresses. You will also verify end-to-end connectivity using the ping command. This lab is consist of following eight steps.

           Assign IPv6 address to Router 0 Interfaces

           Assign IPv6 address to Router 1 Interfaces

3            Enable IPv6 Routing on both Routers

5            Assign IPv6 address to PCs

6            Configure Static IPv6 routing on both Routers

8            Verify router configuration and end-to-end connectivity

If you have a real router then setup the topology according to the topology diagram given above. If you have no router, then you can do this with Cisco packet tracer. You can download Cisco Packet tracer from here. You can also download the above topology from here. Here we will discuss the Cisco packet tracer topology.

Please follow and like us: